What is the difference between 98H and 98t tires?

The T or H part of the code indicates the speed rating of the tires. A speed rating of T indicates that the tire can be safely driven up to 118 mph. A tire with an H rating has a higher limit — 130 mph — which means it can be safely driven faster than the tire with the 94T code.

What is the difference between 98H and 98v Tyres?

H-rated tires are rated for a maximum speed of 130 mph. The V rating is the next rating faster, and V-rated tires are good to 149 mph. Both H- and V-rated tires are considered to be performance-touring tires.

What does H speed rating mean?

The speed rating on a tire indicates the fastest speed a tire can handle before it affects the tire’s performance. … For example, “H” would translate to a tire that can only handle speeds up to 130 mph (or 210 km/h).

What does Y and H mean on tires?

The most common ratings are S and T (sedans, minivans, light trucks); H (some passenger cars, sports cars, coupes, some light trucks); N, P, Q and R (light trucks); and V, W and Y (high-performance cars). Most winter tires have Q, S or T speed ratings.

What is the 275 on tires?

This number indicates that your tire has a width of 275 millimeters. This number means that your tire has an aspect ratio of 55%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 55% of the width. In this case, the sidewall height works out to be 151 millimeters.

Can I mix V and W rated tyres?

The final rating is the maximum speed the tyre is legally approved for. You can invalidate your car insurance by fitting new tyres that have a lower speed rating than the manufacturer’s original fit. … Mixing tyre speed ratings isn’t recommended.

What does 85T mean on tires?

MRF ZTX 165/80 R14 85T Specifications

85 is the load index i.e. the maximum weight each tyre can carry at full speed. T is the speed rating i.e. the maximum speed for the tyre at full load.

What is 99H on a tire?

235/55R17 99H- The load index (99) is the tire size’s assigned numerical value used to compare relative load carrying capabilities. The higher the tire’s load index number, the greater its load carrying capacity. … Typically, the load indexes of the tires used on passenger cars and light trucks range from 70 to 110.

Do H or V rated tires last longer?

Not necessarily. Those ratings are for ability to handle speed or heat buildup. The rating for tire life is a treadwear number. The treadwear number doesn’t indicate how many miles a tire will last, but is a reference to how long it is expected to last compared to a reference tire.

What speed rating is W?

168 mph
A relatively new addition to the speed rating chart, tires with speed rating “W” can achieve a maximum sustained speed of 168 mph (270 kph).

What does r19 mean on a tire?

Diagonal. 19. The tire size was designed to fit rims or wheels that are 19 inches in diameter.

What does 70 mean on a tyre?

What is the tyre load index rating?
LOAD INDEXKG MAX. LOAD PER TYRE
68315
69325
70335
71345

What does 92w mean on a tire?

92w the first two numbers 92 refer to the load rating and the letter w refers to the maximum speed rating. 92=1,389 pounds (a mid-rating) and W=168 mph (extremely high!) Bucky B. · June 18, 2020. 1 of 1 found this helpful.

Can I use V rated tires instead of W?

Nissan, Cadillac, Toyota, and Honda are currently using higher original equipment or V-rated tires on approximately 70% of their brand new vehicles. A V rating represents 149 mph but no faster. W, on the other hand, means the tires can achieve maximum speeds of up to 168 mph.

What does P mean on tires?

P identifies your tire as a Passenger Tire. The P stands for PMetric. If your tire size starts with LT rather than a P than it identifies the tire as a Light Truck tire. … For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width.

What does R mean on Tyres?

radial tyre
The tyre designation R, which comes before the rim diameter marking, means that this tyre is a radial tyre. Other examples are “B” for Bias-ply or “D” for Diagonal construction. Radial tyres are the most common tyres on the road today.

What does 120 116q mean on a tire?

Light Truck Tire Load Index

For example, a light truck tire with a load index of 120/116 means a load capacity for a single tire of 3,086 pounds and a load capacity of 2,756 pounds for two tires.

What does HT stand for on a tire?

Highway Terrain
H/T (Highway Terrain) Tires for Daily Commute and Highway Driving. Chances are your SUV, crossover, or light truck came standard with a set of H/T tires built for highway driving.

What does 109t mean on tires?

The load index number, 109, refers to the weight the tire can carry, in this case, 2271 lb. However, the load index is not a linear function (refer to the chart for common values). A load index of 120, which might be found on a 3/4-ton HD pickup, carries twice the weight of a load-index 95 tire.

What does RS mean on tires?

Senior Member. rs is more of a higher performance tire where as the ls is more of a passenger tire.. neither comes with a tread warranty… ls is not directional and the rs is an inside outside tread design.

What is the difference between a T and HT?

Noise. Off-road oriented A/T tires tend to have large, square tread blocks. As they contact the road, these tread blocks emit a certain amount of vibration that manifests as a high-pitched hum or drone. H/T tires have chevron or back-angled tread blocks that help to reduce the acoustic effects of tire contact.

What is LT and HT tires?

The “P” stands for Passenger and the tire is rated for a Passenger vehicle. The “LT” preceding the numbers on a tire (ex:LT245/75/R20) stands for “Light Truck; “LT”” and I believe, but may be wrong that HT stands for Highway Tire?? I do know is that this unit will not support LT, or HT tires.