What is the best plywood to use for a roof?

Most Common Thickness

For rafters spaced 20 or more inches apart, 1/2- or 5/8-inch plywood is recommended. The most common rafter spacing is 24 inches, and 5/8-inch plywood is recommended for that. It will support roof loads for most situations and is the standard for most roof applications.

What grade of plywood is used for roof sheathing?

1/2 or 3/4-inch Plywood for Roof Sheathing? – Traditionally, 1/2-in CDX plywood was common choice with 24-in rafter spacing. However, heavier roof loads may require the use of 3/4-in CDX plywood for roof sheathing. Roofs with less pitch often carry heavier loads, including snow and ice accumulations in the winter.

What kind of wood should you use on a roof?

Oriented strand board (OSB) – OSB is the most common type of material used for roof decking. It’s durable and readily available, and has relatively low costs. OSB is made of interwoven strands of wood bonded with adhesive.

What kind of plywood do you use for lean to roof?

Roof and Floor

Most builders use 15/32 CDX for the roof; it is an exterior-grade plywood with a thickness just under 1/2 inch.

What is the best material for roof sheathing?

1) Plywood

This sheathing option is considered one of the strongest and more durable options. Typically, they come in 4-foot by 8-foot sheets. Rafters and joints that are spaced further apart will require thicker sheets of plywood to prevent roof sagging.

Is 7/16 OSB OK for roofing?

Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.

How thick should plywood be for a shed roof?

Plywood thicknesses for roofs start at 3/8” in areas with light load requirements on rafters at 16” centers. Thicknesses of 1/2 to 5/8 inch are common with rafters spaced at 24” centers. For heavy load rated areas, 3/4-inch-thick plywood is recommended, regardless of rafter spacing.

What is exterior grade plywood?

Exterior means the panels have been waterproofed and can withstand inclement weather. Use exterior rated plywood for permanent outdoor structures that will be exposed to water long-term. Exposure 1 means the panels have been waterproofed and can withstand exposure to the elements during construction.

Can you put plywood over plywood on roof?

The new plywood will have to be nailed to the rafters or roof trusses. … But, with the old plywood left in place, it will be considerably more difficult to locate the rafters to ensure proper nail placement.

What is the cheapest way to roof a shed?

In most cases, MSR roll roofing is the cheapest shed roof material you can buy. Roll roofing is also the easiest shed roof to install because you can cover large areas quickly by simply rolling it out and nailing it down.

Is OSB or plywood better for roof sheathing?

Plywood Holds the Moisture Advantage Over OSB

When plywood gets wet, it tends to swell. … OSB takes longer than plywood to get saturated, but also takes much longer to dry out. When used as roof sheathing, this tendency to hold moisture means it will degrade faster than plywood when exposed to chronic leaks.

How thick should Plywood be to walk on?

Sizing the Plywood

No matter what the spacing is on your ceiling joists, 3/4-inch plywood should be used if you plan on walking on it. If you plan on placing the plywood around the perimeter of the opening or door and using it only to store light boxes or materials, 1/2-inch-thick plywood should suffice.

What kind of wood should I use for a shed roof?

Cedar or pine shingles can really be a lovely addition to your garden shed. Any type of wood shingle is going to be durable against most weather elements your shed will encounter. The natural use of wood for the roof can be a great choice, but there are some points to keep in mind. Wood shingles are not waterproof.

What is the cheapest material for a shed roof?

Felt is the classic inexpensive roofing material for sheds. It’s perfect for smaller budgets and the average DIYer. It’s so easy to re-felt your shed roof: simply lay the felt on your shed roof and nail it down. That’s it!

Does a shed roof need tar paper?

So, is roofing felt necessary on a shed? Roofing felt is necessary on a shed, as it not only protects the interior from water damage but also extends the life of your shingles. Felt is asphalt-infused synthetic or wood composite paper that repels water.

Can I use 11mm OSB for roof?

The thickness of OSB that you need varies on where it is used in a building. Typically 3/4″(18mm) for floors and 3/8″ (9mm) for walls and 1/2″ (11mm) roof. Also make sure that you get your supporting timbers at the correct spacing.

How do you attach plywood to a shed roof?

What thickness OSB for shed roof?

For an inexpensive, value option 9mm OSB can be used for your garden shed roof.